Sram Transmission Chain Length Calculator

SRAM Transmission Chain Length Formula:

\[ Chain\ Length = \frac{(Chainstay\ Length \times 2)}{12.7} + \frac{Teeth\ on\ Largest\ Cog + Teeth\ on\ Largest\ Chainring}{4} + 2 \]

Recommended Chain Length:

Unit Converter ▲

Unit Converter ▼

From:	To:

1. What is SRAM Transmission Chain Length?

The SRAM Transmission chain length calculation determines the optimal number of chain links needed for your drivetrain based on your bike's chainstay length and gear sizes. Proper chain length is crucial for smooth shifting and drivetrain longevity.

2. How Does the Calculator Work?

The calculator uses the SRAM Transmission chain length formula:

\[ Chain\ Length = \frac{(Chainstay\ Length \times 2)}{12.7} + \frac{Teeth\ on\ Largest\ Cog + Teeth\ on\ Largest\ Chainring}{4} + 2 \]

Where:

\( Chainstay\ Length \) — Distance from center of bottom bracket to rear axle (mm)
\( Largest\ Cog \) — Number of teeth on largest rear cog
\( Largest\ Chainring \) — Number of teeth on largest front chainring
12.7 — Standard chain link length in mm

Explanation: The formula accounts for the total chain path length and adds compensation for gear wrap and derailleur capacity.

3. Importance of Proper Chain Length

Details: Correct chain length ensures optimal shifting performance, prevents excessive wear on drivetrain components, and maintains proper chain tension in all gear combinations.

4. Using the Calculator

Tips: Measure chainstay length accurately in millimeters. Count teeth on largest cog and chainring carefully. The result is rounded to the nearest whole number of links.

5. Frequently Asked Questions (FAQ)

Q1: Why is chain length important for SRAM Transmission?
A: SRAM's Transmission system requires precise chain length for optimal performance of its unique derailleur and shifting mechanism.

Q2: What if my calculated length is between whole numbers?
A: Always round up to the nearest whole number for safety margin in all gear combinations.

Q3: How do I measure chainstay length accurately?
A: Measure horizontally from center of bottom bracket to center of rear axle, parallel to the ground.

Q4: Does this work for all SRAM drivetrains?
A: This formula is specifically optimized for SRAM Transmission systems. Other drivetrains may use different calculations.

Q5: Should I add more links for full suspension bikes?
A: No, the formula already accounts for typical suspension movement. Use the calculated length as-is.